ANNUAL EQUIPMENT & PRODUCT BUYER'S GUIDE


PARTS & SUPPLIES  HEX Shaft Rollers


All Progressive roller mowers are equipped with hardened, HEX shaped shafts at the ends of each deck roller, as standard equipment. Field proven to increase component life and reduce routine maintenance, the HEX design provides positive bearing engagement and ensures that as the mower moves, the supporting bearings always turn. This eliminates any chance of a round roller-end shaft turning inside the bearing leading to pre-mature failure of both the bearing and shaft. No specialized collars or sleeves to worry about as you would with less robust designs. The heavy wall, full length steel rollers remain unchanged, including the rounded and internally reinforced anti-scuff ends. Like many of the other new features Progressive has introduced, older mowers can be updated to the new hardened HEX roller shaft design and HEX bearing without replacing the entire roller or the side channels. Now that’s Progressive!


 Greaseable Hex Shaft Roller-End Bearings on all Roller Mowers


As a result of positive customer feed-back, all Progressive roller mowers are equipped with greaseable roller-end bearings as standard equipment. All Progressive roller mowers are fitted with the heavy-duty 2-bolt greaseable flange bearings that accommodate the field proven HEX shaft roller design, which provides positive bearing engagement and ensures that shaft does not turn within the bearing. Special grease is NOT required, and recommended greasing intervals are set at 50 hours. Best of all, older Progressive roller mowers can be updated to the greaseable HEX bearing without replacing the roller.





Replacement Parts R&R Products manufactures thousands of replacement parts ranging from sod cutter blades (to fit Brouwer, Bucyrus, Kesmac, Trebro, Ryan, Poyntz, Texas Sod Harvesting, Princeton and Nunes) to reel, rotary, and flail mower parts (to fit Jacobsen, Toro, Kesmac, John Deere, Ransomes, Roseman, Jerry Clipper, Mott & Ford) to aerating blades (to fit Ryan, Rogers, Jacobsen, Toro, John Deere, and Hahn Westpoint). Call 800-528-3446 or visit www.rrproducts.com.


Big Tick 1040/ 1048


• 40 or 48” Big Rolls • 


TurfTick 1016/ 1024 • 16 or 24” Rolls or Slabs


• Ergonomic hand stacked


www.vuuren.com Big Tick 1040 TPI Turf News November/December 2023 71 TurfTick Universal 2316


• 16” Rolls • Automatic stacked on universal pallet sizes, in universal stacking patterns


• Universal tractor choice


sales@vuuren.com


+31306661348


Dealers wanted!


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148