3M Direct Bury Splices: The most reliable option on the market.


When your landscape irrigation and outdoor lighting application projects need the best, don’t settle for imitators or generic splices. They may seem more cost effective at the start, but you’ll be paying more for the issues they cause down the road. Trust the job to the 3M Direct Bury Splice courtesy of Paige Water Solutions. They’re water-resistant, made in the USA and can be installed above or below ground.


Product highlights 600V rating UV-resistant UL-listed for the US and Canada


Meets Directive 2006/95/EC and IEC standards EN61984:2009, EN60998- 1:2004 and EN60998-2-4:2005


DBR/Y-6 Red & Yellow Connector Paige Part No. 270672


DBO/B-6 Orange & Blue Connector Paige Part No. 270674


Available from Paige Water Solutions, Master Distributor for 3M


Ready to order? Visit us online at www.paigewater.com


* Not for continuous submersion in water * 3M is a registered trademark of the 3M Company


© 2023 Paige Electric, LP


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48