REDUCE INCOMING PRESSURE FOR OPTIMAL NOZZLE PERFORMANCE


THE PRESSURE-REGULATED BODY for Hunter PGP-04 and I-20 rotors prevents misting and allows the nozzles to operate at peak efficiency, saving up to 25 percent more water. The Hunter PRB rotor reduces high incoming pressures of 3.5-7 Bar and reduces it to 3.1 Bar. Having the pressure regulator in the body allows it to remain in place and functional even if the original riser is removed and replaced for service.


PGP-04-PRB 10 cm plastic


I-20-06-SS-PRB


10 cm and 15 cm plastic or stainless


RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® Learn more. Visit hunterindustries.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52