IN ACTION


Here are pictures of an ITT removable bundle heat exchanger that had 4 tubes plugged by others and the customer wanted us to replace the tubes. The team at Radiator Services in Louisiana had some trouble removing one of the tubes because it was bent in the shell. But David Bienvenu was able to modify a tube puller to reach deep into the tube. He pulled it part ways out then used the mast on our forklift and the hydraulic tilt to pull it out 6” at a time. Sometimes, you just need to think outside of the box!


Here’s a recent job from the team at GT Automotive Center in Ambler, Pennsylvania. They serviced a Cummins generator radiator originally made by Bearward.


Want to see your work featured in this section of The Cooling Journal? Email your photos to linda@narsa.org!


Here’s a look at NARSA/IDEA member Industrial Radiator Service’s backyard with downtown Dallas in the background. Industrial Radiator’s team recently worked on 2 blue horizontal framing radiators and a silver framework of a framing cube radiator in the background. All coolers removed from cube for service.


January/February 2022| THE COOLING JOURNAL | 27


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36