ANNUAL EQUIPMENT & PRODUCT BUYER'S GUIDE
SOD INSTALLERS Brouwer Kesmac Brouwer RM 2430, RM 2442 & RM 2448 RollMate Big Roll Sod Installer • Hydrostatic transmission •
• • • • •
Easy to operate fingertip controls Heavy-duty steel frame design
Excellent for large roll installation on slopes Installs 24-in., 30-in., 42-in. and 48-in. rolls
Pivoting rear wheel steering for minimal turf damage or scuffing, excellent maneuverability Electric Start 11 hp Honda engine
KWMI Track Big Roll Sod Installer with Clamp System This installer is an all-terrain rubber-tracked unit with 2,500- lb. load capacity and choice of clamp or bar hook-up, allowing for installation of rolls from 30- to 48-inches wide. Switch from clamp to bar as needed. It has a larger pocket for the sod roll and balances with or without a load. Driver experiences outstanding visibility from a standing platform and the easy operation allows for tight seams and wall- to-wall installation. The maneuverability and low ground pressure tracks allow for installation in tight areas and all soil and weather conditions. Model 4230 and Model 4830 are available with a Kohler ECH749 26.5 hp Command Pro Engine with a dual air-filtration system. Model 4226D and Model 4826D come with a Kubota 05 Series 3-Cylinder liquid-cooled engine. Optional attachments: • Pallet forks • Sod roller • Mini-harvester—allows for cutting and installation with same machine
KWMI Wheel Big Roll Sod Installer The Big Roll Sod Installer is a four-wheel drive all-terrain machine with foam-filled tires to ensure no flat tires on the job. This machine offers top of the line maneuverability with rear wheel steering to allow for a tight turning radius and front and rear hydraulic wheel motors that pull in tandem on a frame with 2,500-lb. load capacity. A single joystick controls forward/reverse movements and roll lifting. Its hydraulic transmission exchanges speed for torque. The 42- and 48-inch installers come standard with a liquid-cooled Kubota 05 Series 3-Cylinder Engine. Choose between a hydraulic roll clamping system or traditional bar system, both of which have the capacity to install rolls from 30- to 48-inches.
74
TPI Turf News November/December 2019
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124
