search.noResults

search.searching

dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
ANNUAL EQUIPMENT & PRODUCT BUYER'S GUIDE MOWERS


Progressive Turf Equipment, Inc. TDR-22/TDR-22G – Roller Finishing Mower The TDR-22/TDR-22G is the most widely used 22-ft. roller mower in North America. It’s available with bolt-on decks in either painted or the popular galvanized finish. Featuring enhanced fore/aft deck balance, beneficial in soft conditions, a cut height as low as ½-in. and an optional wide profile tire with 70 percent greater contact area to minimize ground pressure and soil compaction. Designed with maintenance free blade spindles and 100-hour PTO shaft greasing intervals for reduced maintenance. Equipped with the industry exclusive Pro Lift-N-Turn™ makes turning easier on the turf. Lifting all decks during a turn prevents crop damage from the rollers sliding across the turf, leaving more turf that can be harvested from the headlands. Automatic mechanical stops prevent the decks from raising too far. Pro Lift-N-Turn™ has eliminated the issues competitive models face when turning on the headlands and it’s all done without needing wires, sensors or control valves.


Progressive Turf Equipment, Inc.


HEX Shaft Rollers All Progressive roller mowers are equipped with hardened, HEX shaped shafts at the ends of each deck roller, as standard equipment. Field proven to increase component life and reduce routine maintenance, the HEX design provides positive bearing engagement and ensures that as the mower moves, the supporting bearings always turn. This eliminates any chance of a round roller-end shaft turning inside the bearing leading to pre-mature failure of both the bearing and shaft. No specialized collars or sleeves to worry about as you would with less robust designs. The heavy wall, full length steel rollers remain unchanged, including the rounded and internally reinforced anti-scuff ends. Like many of the other new features Progressive has introduced, older mowers can be updated to the new hardened HEX roller shaft design and HEX bearing without replacing the entire roller or side channels. Now that’s Progressive!


Progressive Turf Equipment, Inc.


Pro Lift-N-Turn™ The productivity advantage of Progressive’s exclusive Pro Lift-N-Turn™ is standard equipment on all Progressive 15.5, 22, 26 and 30-foot roller mowers. Using only one hydraulic function, operators have the ability to slightly raise the decks off the ground temporarily with the PTO still engaged. This makes turning easier on the turf as the weight of the mower is distributed between the tractor and the high floatation tires. It also reduces the number of PTO engagement cycles required. Lifting all of the decks prevents crop damage from the rollers sliding across the turf during a turn - leaving more headland turf that can be harvested. Automatic mechanical stops prevent each deck from raising too far (See arrow). No vulnerable cylinder position sensors, wires or electrical solenoid valves are needed as with other systems. Pro Lift- N-Turn™ has simply eliminated the issues competitive roller mowers face when turning on the headlands.


Progressive Turf Equipment, Inc. Reduced Maintenance Progressive designs our mowers as if we were maintaining the mower ourselves, so eliminating daily service requirements was an important design goal. For several years all of Progressive’s mowers have been equipped with field proven, maintenance free sealed bearings in the blade spindles as standard equipment. This means you don’t have to worry about a missed service. Adding in the extended 100-hour PTO shaft greasing intervals, and fewer grease fittings overall all mean more time cutting – less time maintaining; and more $$ in your pocket!


TPI Turf News November/December 2019 39


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124