Page 51 of 108
Previous Page     Next Page        Smaller fonts | Larger fonts     Go back to the flash version

ANNUAL EQUIPMENT & PRODUCT BUYER'S GUIDE

SOD HARVESTERS Bucyrus Equipment Company, Inc. Model 420SR Semi-Automatic Big Roll Harvester The Magnum 420SR Big Roll Harvester incorporates features of the Magnum 42 as well as some features from the Magnum 4200AR: • Hydraulic chop-off assembly for accurate, consistent lengths of cut • Large removable tube rack for less down time, easy reloading • Tube injector for quick, easy tube addition • Self-starting conveyor to eliminate wrapping turf around the tube by hand • Rear rubber conveyor mat for longer life, less maintenance • Net injector to introduce net to the big roll at the start or end • Net splitter for harvesting two 21- or 24-in. rolls • Upgraded hydraulic components to increase efficiencies and harvest speeds For more information, visit www.magnumenp.com.

Bucyrus Equipment Company, Inc. 4200AR Automated Harvester This harvester is automated for one person with all of the controls on a cab- mounted control panel. From the comfort of the cab, one person can control procedures, such as setting lengths of big rolls, roll tension, dumping of big rolls (rolls are dumped to the side so they will not interfere with the next pass), injecting tubes and netting. For more information, visit www.magnumenp.com.

Bucyrus Equipment Company, Inc. Magnum Pallet Sod Harvester The Magnum Pallet Sod Harvester cuts small rolls, folds or slabs, two at a time, in 16-, 18-, 21- or 24-in. widths. Production is faster with less turn around. The pallet is carried between stackers for easier stacking and pieces are guided into place. A foot pedal will lower the pallet so stackers do not have to lift pieces. This machine easily converts to a big roll harvester. For more information, visit www.magnumenp.com.

Bucyrus Equipment Company, Inc. Magnum Big Roll Harvester The Magnum Big Roll Harvester is a pull-type unit powered by the PTO of a 40- to 60-hp tractor. Dual floating cutter heads produce consistent cuts in 30-, 32-, 36-, 40-, 42- and 48-in. widths. Two variable speed mats produce the tightest roll possible. A patented netting system applies the net to the sod after it is cut and before it is rolled. This allows weak or immature sod to be successfully harvested and installed. For more information, visit www.magnumenp.com.

TPI Turf News November/December 2016

49

Previous arrowPrevious Page     Next PageNext arrow        Smaller fonts | Larger fonts     Go back to the flash version
1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  10  |  11  |  12  |  13  |  14  |  15  |  16  |  17  |  18  |  19  |  20  |  21  |  22  |  23  |  24  |  25  |  26  |  27  |  28  |  29  |  30  |  31  |  32  |  33  |  34  |  35  |  36  |  37  |  38  |  39  |  40  |  41  |  42  |  43  |  44  |  45  |  46  |  47  |  48  |  49  |  50  |  51  |  52  |  53  |  54  |  55  |  56  |  57  |  58  |  59  |  60  |  61  |  62  |  63  |  64  |  65  |  66  |  67  |  68  |  69  |  70  |  71  |  72  |  73  |  74  |  75  |  76  |  77  |  78  |  79  |  80  |  81  |  82  |  83  |  84  |  85  |  86  |  87  |  88  |  89  |  90  |  91  |  92  |  93  |  94  |  95  |  96  |  97  |  98  |  99  |  100  |  101  |  102  |  103  |  104  |  105  |  106  |  107  |  108