This page contains a Flash digital edition of a book.
State Technical College of Missouri


EDS 251 Rubber Gloving and Underground Distribution. The student will obtain basic discipline in the methods of working on energized lines with rubber gloves and rubber sleeves from an insulated aerial platform in a safe and efficient manner. The student will be exposed to the care and well-being of soft and hard shell rubber goods and their application. The student will also receive instruction on personal protective equipment, hot-line tools, live- line maintenance and will also review the safe operation of aerial platforms and grounding practices. Additionally, the student will gain working knowledge of URD systems. The student will receive practical experience in primary and secondary cables, installation of 200 and 600 amp elbows, splices, lightening arrestors and overhead termination’s. The installation of single- and three-phase padmount transformers will also be covered. The requirements of shoring and sloping of trenches required by the safe work practices will be discussed. Troubleshooting of primary and secondary cable fault locating and associated safe work practices and procedures may be covered. Prerequisites: EDS 115, EDS 125, and EDS 170 with a grade of “C” or better. 4 credit hours.


EDS 272 Fusing, Substation, and Voltage Regulation Equipment. The student will be introduced to the different types and methods of system coordination, substations, capacitors, voltage regulators and auto-boosters. A working knowledge of oil reclosures, sectionalizers and the application of fuses will also be gained. Practical experience will be gained in the grounding, inspection, maintenance and operation of basic substations. The course will also introduce single- and three-phase pole mount reclosures, gang operated air break and load break switches, and substation fuses and reclosures. Prerequisites: EDS 237 and EDS 251 with a grade of “C” or better. 2 credit hours.


EDS 299 Special Topics in Electrical Distribution Systems. Special Topics in Electrical Distribution Systems (EDS) may include instruction on topics not covered in other EDS courses. Topics covered in other EDS courses may also be covered in more depth in this special topics course. Projects may be undertaken in any area related to the major program with credit hours determined by the level and amount of involvement. The minimum involvement required for one credit is 30 contact hours. The specific topic(s), objectives, plan of instruction, and evaluation criteria must be documented in the syllabus; approved by the Department/Division Chair; and filed in the Academic Records Office. Students may complete more than one Special Topics course, provided that the credits earned in this manner do not exceed a total of four (4) credits. 1-4 credit hours.


116

Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172  |  Page 173  |  Page 174  |  Page 175  |  Page 176  |  Page 177  |  Page 178  |  Page 179  |  Page 180  |  Page 181  |  Page 182  |  Page 183  |  Page 184  |  Page 185  |  Page 186  |  Page 187  |  Page 188  |  Page 189  |  Page 190  |  Page 191  |  Page 192  |  Page 193  |  Page 194  |  Page 195  |  Page 196  |  Page 197  |  Page 198  |  Page 199  |  Page 200  |  Page 201  |  Page 202  |  Page 203  |  Page 204  |  Page 205  |  Page 206  |  Page 207  |  Page 208  |  Page 209  |  Page 210  |  Page 211  |  Page 212  |  Page 213  |  Page 214  |  Page 215  |  Page 216  |  Page 217  |  Page 218  |  Page 219  |  Page 220  |  Page 221  |  Page 222  |  Page 223  |  Page 224